Resetting Ip Address

Posted on by

There are several reasons why you might want to reset your router or modem to factory settings. Perhaps you want to sell your devices. Or maybe you want to reset your IP address. Whatever the case, here’s how to reset your router and modem.

Warning: Resetting your router or modem will erase all your custom settings. Make sure to have a copy of your settings before doing a factory reset. You can find these settings in your manual or online. Simply do a web search for your router or modem model’s manual.

DHCP is a protocol for assigning dynamic IP addresses to devices on a network. Ipconfig /release drops the current DHCP address ipconfig /renew gets a new DHCP address. The 'ipconfig /release' and 'ipconfig /renew' commands are widely used between IT professionals at all levels. Set the IP settings and hit the Apply then the OK button when done. Refer Technote 1075903 Valid IP address range for Micro800 Controllers for choosing a valid static IP address for your Micro800 controller. Change the PC’s IP settings to be on the same network as the new controller’s IP settings.

How to Reset a Router

Change a Phone's IP Address on iPhone You can also change the IP address on a mobile device such as the Apple iPhone as follows: Open the Settings app and select Wi-Fi. Tap the small (i) next to the network and select Configure IP. Click Start on the task bar, type cmd into the search box and press Enter. Step 2 Type ipconfig /release at the prompt window, press Enter, it will release the current IP configuration.

I'm not sure renewing or resetting your IP address needs an introduction. Sometimes you have connection issues with your internet provider and resetting your IP address will correct this. This is how you reset your IP address manually.

  1. Keep your router plugged in.
  2. Find your router’s reset button. This will be on the back or the bottom of your router.
  3. Use a paperclip to hold down the reset button for 30 seconds.
  4. Release the button.
  5. Wait for the router to power back on.

If your router doesn’t have a reset button, youwill have to reset it using its configuration web interface.

How to Reset Router From Configuration Page

  1. Type your router’s IP address into any web browser’s search field. Here’s how to find for your router’s IP address.
  2. Enter your username and password when prompted. If you didn’t change these, you will find the default username and password on the back or bottom of the router.
  3. Go to System or System Tools. This will differ depending on what kind of router you have.
  4. Look for Restore or Factory Default.
  5. Click Restore or Reset and OK to confirm.
  6. Wait for the router to reboot.

How to Reset a Modem

The steps to reset a modem may be different dependingon which model you have, but the basics are the same. Here is the generalprocess:

Resetting Ip Address On Laptop

Resetting Ip Address
  1. Keep your modem plugged in.
  2. Find the modem’s Reset button. This may be on the back or bottom of the device.
  3. Press and hold the button with a paperclip.
  4. Release the button when the modem lights start to flicker.
  5. Wait for the Internet light to turn green.

While your modem or router is resetting, do not interrupt the process by clicking a link, closing your browser, or powering off the device. Doing so might corrupt the firmware.

Now that you know how to reset your router, check out our guide on how to test your WiFi speed.

in stock
HelloTech.com
$169.00
16 new from $152.99
Amazon.com

Was this article helpful?

Related Articles

-->

This article shows how to reset the network interface for Azure Windows VM to resolve issues when you cannot connect to Microsoft Azure Windows Virtual Machine (VM) after:

  • You disable the default Network Interface (NIC).
  • You manually set a static IP for the NIC.

If your Azure issue is not addressed in this article, visit the Azure forums on MSDN and Stack Overflow. You can post your issue in these forums, or post to @AzureSupport on Twitter. You also can submit an Azure support request. To submit a support request, on the Azure support page, select Get support.

Reset network interface

For VMs deployed in Resource group model

Resetting Ip Address Windows 10

  1. Go to the Azure portal.

  2. Select the affected Virtual Machine.

  3. Select Networking and then select the network Interface of the VM.

  4. Select IP configurations.

  5. Select the IP.

  6. If the Private IP assignment is not Static, change it to Static.

  7. Change the IP address to another IP address that is available in the Subnet.

  8. The virtual machine will restart to initialize the new NIC to the system.

  9. Try to RDP to your machine. If successful, you can change the Private IP address back to the original if you would like. Otherwise, you can keep it.

Ipconfig Release Renew

Use Azure PowerShell

  1. Make sure that you have the latest Azure PowerShell installed

  2. Open an elevated Azure PowerShell session (Run as administrator). Run the following commands:

  3. Try to RDP to your machine. If successful, you can change the Private IP address back to the original if you would like. Otherwise, you can keep it.

For Classic VMs

Important

Classic VMs will be retired on March 1, 2023.

If you use IaaS resources from ASM, please complete your migration by March 1, 2023. We encourage you to make the switch sooner to take advantage of the many feature enhancements in Azure Resource Manager.

Resetting Ip Address Windows 7

For more information, see Migrate your IaaS resources to Azure Resource Manager by March 1, 2023.

To reset network interface, follow these steps:

How To Refresh Ip Address

Use Azure portal

  1. Go to the Azure portal.
  2. Select Virtual Machines (Classic).
  3. Select the affected Virtual Machine.
  4. Select IP addresses.
  5. If the Private IP assignment is not Static, change it to Static.
  6. Change the IP address to another IP address that is available in the Subnet.
  7. Select Save.
  8. The virtual machine will restart to initialize the new NIC to the system.
  9. Try to RDP to your machine. If successful, you can choose to revert the Private IP address back to the original.

Use Azure PowerShell

  1. Make sure that you have the latest Azure PowerShell installed.

  2. Open an elevated Azure PowerShell session (Run as administrator). Run the following commands:

  3. Try to RDP to your machine. If successful, you can change the Private IP address back to the original if you would like. Otherwise, you can keep it.

Delete the unavailable NICs

Resetting A Remote IO's IP Address

After you can remote desktop to the machine, you must delete the old NICs to avoid the potential problem:

  1. Open Device Manager.

  2. Select View > Show hidden devices.

  3. Select Network Adapters.

  4. Check for the adapters named as 'Microsoft Hyper-V Network Adapter'.

  5. You might see an unavailable adapter that is grayed out. Right-click the adapter and then select Uninstall.

    Note

    Word

    Only uninstall the unavailable adapters that have the name 'Microsoft Hyper-V Network Adapter'. If you uninstall any of the other hidden adapters, it could cause additional issues.

  6. Now all unavailable adapters should be cleared of your system.