Rsa Securid Authenticate App For Mactreeyour

Posted on by
Rsa securid authenticate app for mac
  1. Rsa Securid Authenticate App For Windows
  2. Rsa Securid Authenticate App For Mac
  3. Rsa Securid Authenticate App Store

RSA SecurID Authenticate is an Android Communication App that is developed by RSA Security and published on Google play store on NA. It has already got around 50,000+ downloads so far with an average rating of 3.0 out of 5 in play store.

RSA SecurID Authenticate requires Android OS version of 3.4 and up. Also, it has a content rating of Everyone , from which one can decide if it is suitable to install for family, kids or adult users.

The RSA SecurID soft token app is available for your iOS or Android device. Like the fob, the soft token displays a tokencode every 30 seconds. However, the soft token uses a different, two-step method of associating a PIN with a tokencode. First, you enter your PIN into the app, as shown in the first screen below.

Rsa securid authenticate app for windows

Since RSA SecurID Authenticate is an Android App and cannot be installed on Windows PC or MAC directly, we will show how to install and play RSA SecurID Authenticate on PC below:

Rsa Securid Authenticate App For Windows

  • With the Authenticate App, users can employ their mobile devices to authenticate with push notification, one-time password (OTP), SMS, biometrics, and more. Software for fast onboarding. RSA software authenticators use the same algorithm as RSA SecurID hardware authenticators, but they don’t require users to carry dedicated hardware devices.
  • The RSA SecurID® Authenticate app works with RSA SecurID Access to provide strong authentication and convenient single sign-on to corporate applications. Install the app on your Android device, and then use the device to authenticate to applications protected by RSA SecurID Access. The Authenticate app lets you conveniently verify your identity by tapping the device, verifying with.

Rsa Securid Authenticate App For Mac

  • Firstly, download and install an Android emulator to your PC
  • Download RSA SecurID Authenticate APK to your PC
  • Open RSA SecurID Authenticate APK using the emulator or drag and drop the .APK file into the emulator to install the App.
  • OR
  • If you do not want to download the .APK file you can still run RSA SecurID Authenticate PC by connecting or configuring your Google account with the emulator and downloading the App from play store directly.

Rsa Securid Authenticate App Store

If you follow the above steps correctly, you should have the RSA SecurID Authenticate App ready to run on your Windows PC or MAC.

Last updated: 09 Jul, 2019
Copy
Copied

If you are a new user logging in for the first time, complete steps 1–3 to enable your RSA SecureID fob, set up a personal identification number (PIN), and change your default NAS password.

If you are a current user and you just need to enable a new fob, complete steps 1 and 2.

Note: These steps apply only to the agency-wide RSA SecurID fobs that are provided by the NAS Division at NASA Ames Research Center. If your token was provided by another NASA center, please contact your local help desk for assistance. If you have a NAS-provided soft token (mobile app), see Enabling Your RSA SecurID Soft Token.

Step 1: Enable Your RSA SecurID Fob

Your SecurID fob was sent in a disabled state. To enable the fob, call the NAS Control Room at (800) 331-8737 or (650) 604-4444. NAS support staff will enable the fob remotely and set it to New PIN Mode. If you are a first-time user, a default NAS password will also be provided to you during the call.

Please note that NAS support staff will confirm your identity by asking you the security question you submitted with your account request form, or by calling you back at your phone number on record.

Step 2: Log into an SFE and Set Up a PIN

Note: Your local system must be configured to log in using the Secure Shell () protocol. You will also need your enabled RSA SecurID fob.

  1. On your local system, open a command-line interface terminal.
  2. Use to log into an SFE, as follows:

    where sfeX is sfe1, sfe2, or sfe3.

    Note: If you use different usernames on your local system and NAS systems, add your NAS username before specifying the SFE. For example:

  3. At the Enter PASSCODE prompt, shown below, type the six-digit tokencode that is displayed on your RSA SecurID fob.

  4. Follow the instructions at the next prompt to create a PIN, which must be exactly 8 alphanumeric characters including both letters and numbers (no special characters). Letters are not case-sensitive. Note: Memorize your PIN. Never write down your PIN.
  5. Wait for the tokencode displayed on your fob to change. Then, enter your PIN at the prompt, followed immediately by the tokencode. For example, if your PIN is 'd701398z' and your fob displays the tokencode '052993,' type d701398z052993 and press Enter:

    Together, your PIN and your current tokencode comprise your RSA SecurID passcode.

    The new-PIN process is now complete, although you may not get clear confirmation on your screen. Currently, PINs do not expire, but this may change in the future.

WARNING: Never divulge your PIN. NAS staff members will never ask you for your PIN. If you think someone may have learned your PIN, call the NAS Control Room at (800) 331-8737 or (650) 604-4444.

Step 3: Log in Again and Change Your Default NAS Password

After you complete the new-PIN process, the system will prompt you to log in again. If you are a new NAS user, you must complete these steps to change your default NAS password.

  1. At the Enter PASSCODE prompt, enter your RSA SecurID passcode (your PIN followed immediately by the tokencode displayed on your fob).
  2. At the next prompt, enter the default NAS password provided to you by NAS support staff.
  3. Change your default NAS password. (See Password Creation Rules.)

    Note: If you are not prompted to update your password after logging into the SFE, you can trigger a prompt by logging into a Lou front-end system (LFE) with the command lou. You will be prompted to input your default NAS password, then asked to create and confirm a new password. Star traders: frontiers getting started.

  4. Wait 15 minutes for the new password to propagate to all systems.
TIP: Each tokencode displayed on your fob can be used only once. If you have to authenticate twice (for example, if you mistype your NAS password), you must wait for your fob to display a new tokencode, and then re-enter the entire passcode (PIN + new tokencode).

You have now completed your first-time authentication to NAS systems using your NAS password and your RSA SecurID token. For information about subsequent logins, see Logging into NAS Systems.

Also read
RSA SecurID Tokens
Enabling Your RSA SecurID Soft Token (Mobile App)